Chapter 9.24
ACCESSORY MANUFACTURING
Sections:
9.24.010 Applicable zones.
Manufacturing shall be permitted as an accessory use in the C-M zone only pursuant to the restrictions of this chapter. (Ord. 806 § 1, 2007).
9.24.020 Restrictions.
A. Such activity shall be restricted to the ground floor of the building or buildings and shall not occupy more than 25 percent of said ground floor area.
B. Not more than five employees shall be engaged in such activity.
C. A commercial appearance shall be maintained by office or window display space or both, across all the street or highway frontage of the building or buildings, except doorways, to a depth of not less than two feet.
D. Any portion of the building or buildings devoted to such activity shall be not nearer than 50 feet to any agricultural or residential zone.
E. The building shall be so constructed, the machinery and equipment shall be so installed and maintained, and the activity shall be so conducted, that all noise, vibration, dust, odor and all other objectionable factors shall be confined or reduced to the extent that no annoyance or injury will result to persons or property in the vicinity.
F. Any such activity shall be conducted wholly within a completely enclosed building.
G. Where a conflict in interpretation occurs regarding application of these provisions to any specific case, the commission shall make such determination. (Ord. 806 § 1, 2007).