Chapter 17.32
MANUFACTURED HOME PARK (MHP)
Sections:
17.32.030 Development standards.
17.32.040 Manufactured home park site plan.
17.32.010 Purpose and intent.
The purpose of this district is to implement the comprehensive plan by providing for high density zoning classifications suitable for the placement of manufactured homes. The manufactured home park zone is designed to provide for manufactured home developments at densities consistent and compatible with other surrounding residential densities. (Ord. 1438 §2(part), 2014)
17.32.020 Principal uses.
Principal uses permitted outright in manufactured home park residential districts shall include:
A. Manufactured homes;
B. Temporary construction offices within a subdivision on which buildings are being erected; and only for the duration of active construction; and
C. Home occupations: see Chapter 17.48. (Ord. 1438 §2(part), 2014)
17.32.030 Development standards.
In addition to meeting the development standards provided in Section 15.40.020, the following provisions shall apply in the manufactured home park district, subject to other provisions of this title, except that where conflicts in regulation occur, the regulations specified in this section or on a development plan approved pursuant to this chapter shall apply:
A. Minimum total land area: five acres;
B. Maximum density with water and sewer: eight units per acre;
C. Minimum lot area: four thousand square feet;
D. Minimum lot width: forty-five feet;
E. Minimum lot depth: sixty feet. (Ord. 1438 §2(part), 2014)
17.32.040 Manufactured home park site plan.
The applicant shall submit a preliminary site plan to the planning commission with submission of a change in zoning application. A list of the names, mailing addresses, and individual property legal descriptions of all property owners within the proposed manufactured home park and the surrounding property owners within three hundred feet of the proposed manufactured home park shall be on file with the city before staff study of a preliminary development plan shall be commenced. Any preliminary development plan shall include the following information presented in a general, schematic fashion.
A. Name and address of the owner and/or operator;
B. Address, location and legal description of the manufactured home park;
C. Extent of the area and dimensions of the site;
D. Size, location and number of manufactured home lots;
E. Entrances, exits, driveways and walkways showing proposed widths;
F. Number, size and location of automobile parking accommodations;
G. Number, location and floor plans, including elevations, of all service buildings, proposed structures, and other accessory buildings;
H. Location, and size of recreation area, if any, including a development plan showing type of landscaping, surface treatment, drainage, apparatus and/or special equipment;
I. Lighting plan of outside areas and service outlets;
J. Tenant storage plan; and
K. Any other information deemed necessary by the planning commission. (Ord. 1438 §2(part), 2014)
17.32.050 Parking.
Parking standards shall be provided in accordance with the terms of Chapter 17.52. (Ord. 1438 §2(part), 2014)