29.24.010 Conditions of permit approval.
Prior to approving a land surface modification permit, the city may require measures to mitigate impacts, including but not limited to the following:
(a) Implementation of recommendations in the geotechnical report.
(b) Restrictions on the nature of fill materials. All materials used as fill shall be nondissolving and nondecomposing. Fill material shall not contain organic or inorganic material that would be detrimental to water quality or existing habitat, or create any other significant adverse impacts to the environment.
(c) Compliance with the city’s rodent abatement standards.
(d) Marking the limit of grading line in the field with a temporary fence and signage as approved by the city.
(e) Installation of temporary protective tree fencing and signage as described in Chapter 95 KZC.
(f) Implementation of erosion control measures, including installation of an erosion control siltation fence along required setbacks from streams, wetlands, and steep-sloped areas.
(g) Implementation of measures to control dust.
(h) Maintenance of streets and storm drains so that they are kept clean of debris resulting from the land surface modification.
(i) Limitation on timing of the land surface modification. The land surface modification should be completed between April 1st and October 1st, unless a wet weather erosion control plan has been approved by the public works department. (Ord. 4151 § 3 (part), 2008)