Chapter 17.20
R-3 ZONE—TRIPLEX
Sections:
17.20.050 Density regulations.
17.20.060 General regulations.
17.20.010 Purpose.
This district is intended for moderate density, one-, two- and three-family dwellings, in order to assure adequate light, air, open space, privacy, and the protection of property values while providing affordable housing in the community. Other uses should only be allowed if they are compatible with these values and consistent with the overall public interest. (Ord. 837 § 1 (part), 2008: Ord. 136 § 3.08 (part), 1974)
17.20.020 Permitted uses.
Permitted uses shall be as follows:
A. All uses permitted in the R-1 zone.
B. Two-family dwellings.
C. Three-family dwellings.
(Ord. 837 § 1 (part), 2008: Ord. 136 § 3.08(a), 1974)
17.20.030 Conditional uses.
The following uses may be allowed in the R-3 zone upon approval of a conditional use permit in accordance with the provisions of Sections 17.52.040 through 17.52.080:
A. Public and semi-public uses as provided in Section 17.50.040.
B. Resource extraction as provided in Section 17.50.050.
(Ord. 837 § 1 (part), 2008)
17.20.040 Prohibited uses.
A. All uses not specifically listed as permitted or conditional uses in this district are prohibited uses; provided, that the city planner may determine that a proposed use is substantially similar to a listed permitted use and authorize the use in accordance with Section 17.06.050; provided further, that uses similar to listed conditional uses may be processed for consideration by the hearing examiner pursuant to Section 17.06.060.
B. Homeless services uses are prohibited in the R-3 zone.
(Ord. 1076 § 2, 2021; Ord. 837 § 1 (part), 2008)
17.20.050 Density regulations.
A. One single-family dwelling is allowed per established and recorded lot according to the plats existing as of August 1, 2003, or as legally created thereafter under the provisions of the city short plat and subdivision requirements.
B. Two- and three-family dwellings shall have a minimum lot size of two thousand eight hundred square feet per dwelling unit per structure.
C. Subdivisions, short plats, replats and/or boundary line adjustments shall have a minimum lot size of seven thousand two hundred square feet.
(Ord. 837 § 1 (part), 2008)
17.20.060 General regulations.
The provisions of Section 17.16.060, General regulations, of the R-1 zone, and Section 17.16.070, Regulations for manufactured homes, shall also apply in the R-3 zone. (Ord. 837 § 1 (part), 2008)