Chapter 19.42
PUBLIC FACILITY REQUIREMENTS
Sections:
19.42.010 Public facilities required to conform to standard plans.
19.42.020 Stormwater management facilities required to meet state standards.
19.42.040 City engineer to determine additional standards and specifications.
19.42.010 Public facilities required to conform to standard plans.
All facilities constructed for developments approved under provisions of this title that are to be dedicated, or otherwise managed by the city, shall be constructed to the standards and specifications of the following unless superseded by a specific provision of this title:
A. City of Sultan Design Standards and Specifications (then-current edition).
B. City of Sultan Water and Sewer Engineering Standards (then-current edition).
C. Snohomish County Engineering Design and Development Standards (then-current edition). (Ord. 1284-17 § 2 (Exh. B); Ord. 1144-12 § 2 (Exh. A))
19.42.020 Stormwater management facilities required to meet state standards.
All facilities for stormwater management, whether intended to be dedicated to the city for ongoing maintenance and operation or intended to be retained in private ownership shall be designed and maintained as provided in the then-current edition of the Stormwater Management Manual for Western Washington published by the Washington State Director of Ecology. (Ord. 1284-17 § 2 (Exh. B); Ord. 1144-12 § 2 (Exh. A))
19.42.030 Facilities within shoreline areas and related to shoreline activities required to meet city standards.
All facilities and activities applied for under the provisions of this code that occur within areas covered by any shoreline environment designation of the city of Sultan shoreline master program are required to meet the procedural and substantive requirements of the then-current edition of the city of Sultan shoreline master program whether intended to be dedicated to the city for ongoing maintenance and operation or intended to be retained in private ownership. (Ord. 1284-17 § 2 (Exh. B); Ord. 1144-12 § 2 (Exh. A))
19.42.040 City engineer to determine additional standards and specifications.
When published standards and specifications do not address the particular issues presented by a development application, or where, for specific reasons documented with findings, the published standards and specifications do not adequately address the situation, the city engineer shall be responsible for one of the following:
A. Providing the standards and specifications that shall be used to address the situation.
B. Requiring the applicant to provide plans constructed and stamped by a third-party engineer of competent capacity for review by the city engineer. (Ord. 1284-17 § 2 (Exh. B); Ord. 1144-12 § 2 (Exh. A))