Division 13-16-005
Traffic Signs

Sections:

13-16-005-0001    Traffic Signs

13-16-005-0002    Traffic Signal Signs

13-16-005-0001 Traffic Signs

A.    Traffic signs shall be installed on square tube posts in accordance with ADOT Signing and Marking Standard Drawings Detail S-1, and City of Flagstaff Standard Engineering Detail 16-05-030. Materials shall meet the requirements of ADOT Standard Specification 607. All sign blanks shall be one-eighth (0.125) gauge aluminum, in accordance with ADOT Standard Specification 608-2.07. All signs shall utilize high intensity prismatic (HIP) sheeting to comply with MUTCD retroreflectivity standards.

B.    Existing signs and posts which are disturbed by a project shall be replaced with new HIP signs and square tube posts. Existing signs and posts shall not be relocated, but shall be salvaged to the City.

C.    Street name signs, other than at signalized intersections, shall be fabricated and installed in accordance with City of Flagstaff Engineering Details 16-05-010 and 16-05-030.

D.    Traffic signs shall be located outside of pedestrian and bicycle ways, including sidewalks, bikeways and bike lanes, FUTS trails, accessible routes, and curb ramps. (Ord. 2017-22, Rep&ReEn, 07/05/2017; Ord. 2020-10, Amended, 09/15/2020 (Res. 2020-13); Ord. 2024-13, Amended, 4/16/2024 (Res. 2024-15))

13-16-005-0002 Traffic Signal Signs

A.    Pedestrian push button signs shall be R10-3E (L, R, or LR) AZ (Arizona Manual of Approved Signs) to match the pedestrian signal display unless otherwise specified.

B.    Street name signs, in accordance with City of Flagstaff Standard Engineering Detail 16-05-020, shall be mounted on each pole mast arm in accordance with ADOT Standard Drawing S-9, except that the mounting brackets shall be pole cat brackets by Xcessories Squared Development and Manufacturing, Inc., or approved equal. (Ord. 2017-22, Rep&ReEn, 07/05/2017; Ord. 2020-10, Amended, 09/15/2020 (Res. 2020-13))