Sections:
13-03-004 Conceptual Plats, Preliminary Plats, Final Plats
13-03-004-0001 Survey Requirements for Mapping
13-03-004 Conceptual Plats, Preliminary Plats, Final Plats
Specific requirements for the conceptual plat, the preliminary plat and the final plat are per Title 11, General Plans and Subdivisions. (Ord. 2017-22, Rep&ReEn, 07/05/2017)
13-03-004-0001 Survey Requirements for Mapping
A. A complete boundary survey based upon fieldwork shall be performed prior to submittal of the preliminary plat.
The boundary survey shall meet the requirements of Division 13-03-002 and shall be clearly referenced on the preliminary plat, including Coconino County recording information. A copy of the recorded survey shall be submitted with the preliminary plat.
B. Mapping (including contours) of the preliminary plat site and adjacent areas shall be sufficient to show clearly the influence of surrounding conditions (topography) as well as the influence of the proposed development on surrounding conditions. The topographic survey shall meet the requirements of Division 13-03-003. Topographic results may be obtained by photogrammetric means.
C. All vertical datum shall be on NAVD 88. Benchmarks shall meet the requirements of Section 13-03-003-0003, and shall be noted on the preliminary plat.
D. The topographic survey shall identify the surveyor and the date performed.
E. USGS 7.5 minute quadrangles will not be accepted as topographic data for most projects. The City of Flagstaff geographic information system (GIS) model may be utilized to provide mapping requirements; however, it will be the responsibility of the land surveyor who seals the plat to verify that the information complies with the precision tolerances of Division 13-03-003. (Ord. 2017-22, Rep&ReEn, 07/05/2017)