Sections:
13-16-001 General
13-16-001-0001 Standards and Applicable Documents
13-16-001-0002 Professional Certification
13-16-001 General
The necessity for installation or removal of traffic signals shall be determined through traffic studies or a traffic impact analysis approved by the City Traffic Engineer. (Ord. 2017-22, Rep&ReEn, 07/05/2017)
13-16-001-0001 Standards and Applicable Documents
A. Except as contained in this chapter, all designs, materials, and construction shall conform to the current version of the following:
1. The Arizona Department of Transportation Standard Specifications for Road and Bridge Construction.
2. The Arizona Department of Transportation Traffic Signal and Lighting Standard Drawings.
3. The Arizona Department of Transportation Signing and Marking Standards.
4. National Electrical Manufacturers Association, Traffic Control Systems, Standards Publication: TS2-1992.
5. International Municipal Signal Association, Inc., Wire and Cable Specifications.
6. Institute of Transportation Engineers, Vehicle Traffic Control Signal Heads: Light Emitting Diode (LED) Circular Signal Supplement.
7. Manual on Uniform Traffic Control Devices for Streets and Highways: USDOT/FHWA.
8. American Association of State Highway and Transportation Officials (AASHTO) Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals.
9. The City of Flagstaff Traffic Signal Standard Drawings.
10. The City of Flagstaff Traffic Signal Approved Products List. (Ord. 2017-22, Rep&ReEn, 07/05/2017)
13-16-001-0002 Professional Certification
The design of traffic signals for private development and capital projects shall be under the direction of a Civil Engineer registered in the State of Arizona, and having a Professional Traffic Operations Engineer certification from the Institute of Transportation Engineers. (Ord. 2017-22, Rep&ReEn, 07/05/2017)