Division 13-16-006
Pavement Markings

Sections:

13-16-006-0001    Longitudinal Pavement Markings

13-16-006-0002    Transverse Markings, Symbols, and Legends

13-16-006-0001 Longitudinal Pavement Markings

A.    Permanent Markings. Permanent pavement markings shall be installed in accordance with ADOT Standard Specification 708.

B.    Temporary Markings. Temporary longitudinal pavement markings, when approved, shall be installed in accordance with ADOT Standard Specification 701-3.05.

Note: This item of work shall apply to all longitudinal pavement markings and other pavement markings not specified to be preformed plastic. (Ord. 2017-22, Rep&ReEn, 07/05/2017)

13-16-006-0002 Transverse Markings, Symbols, and Legends

A.    Permanent markings shall be either:

1.    Dual component markings (epoxy) shall be installed in accordance with ADOT Standard Specification 709; or

2.    Preformed markings installed in accordance with ADOT Standard Specification 705 Type I (may only be used if total project is less than three hundred (300) square feet).

B.    Temporary markings, when approved, shall be either (two (2) options are):

1.    Preformed markings installed in accordance with ADOT Standard Specification 705 Type II; or

2.    Preformed markings installed in accordance with ADOT Standard Specification 705 Type III.

NOTE: This item of work shall apply to all lane use arrows, all transverse pavement markings such as crosswalks and stop bar markings, and all pavement legend markings, except those required for bicycle lanes. (Ord. 2017-22, Rep&ReEn, 07/05/2017)