Chapter 5.82
MACHINE SHOPS
Sections:
5.82.010 Machine shop defined.
5.82.040 Sanitary requirements.
5.82.010 Machine shop defined.
“Machine shop,” as used in this chapter, means and includes every workshop in which machines are made or metal parts thereof are repaired, or where parts of machines or tools, implements, gears, dies, screws or other metal articles are cut, filed, shaped or repaired by means of a lathe or other machinery.
5.82.020 License required.
No person, firm or corporation shall conduct, operate or manage a machine shop within the village without first having obtained a license therefor; provided, that this chapter shall not be construed as requiring an additional license for any class of machine shops specifically licensed under any other provisions of the ordinances of the village.
5.82.030 Fee.
The annual fee for such licenses shall be one hundred ten dollars for a machine shop which occupies two thousand square feet or less of area, plus twenty-eight dollars for each additional one thousand square feet of area or part thereof: provided, that the maximum annual fee shall not be more than five hundred fifty dollars irrespective of the total square feet of area that the machine shop occupies. (Ord. 2010-08A § 16, 2010; Ord. 2010-08 § 16, 2010; Ord. 2002-07 § 42, 2002; Ord. 89-5 § 38, 1989; Ord. 84-5 § 34,1984)
5.82.040 Sanitary requirements.
No building, structure or part thereof used for or in connection with any machine shop shall be so used as to endanger the health or property of the employees or of the public. The owner, lessee, tenant, occupant or manager of any machine shop shall cause all floors and other surfaces around or beneath any machine or workbench to be kept in good order and repair and shall have suitable and convenient sanitary receptacles for receiving waste and cloths used in and about the machine shop for the purpose of cleaning machines or parts thereof or which are intended for any other use. No person suffering from any contagious or infectious disease shall be employed in or about any machine where cutting compound is used. All such cutting compound or fluid shall be kept free from infectious or harmful matter.
5.82.050 Operations at night.
No machine shop shall be operated in the nighttime between the hours of eight p.m. and six a.m. in any place in which a majority of the buildings within a radius of four hundred feet are used exclusively for residence purposes.
5.82.060 Inspections.
It shall be the duty of the fire chief to make or cause to be made such inspections of the premises as may be necessary to ensure compliance with the provisions of this chapter.