Chapter 19.424
SITE DESIGN REVIEW – APPLICATION REVIEW PROCEDURE
Sections:
19.424.020 Determination of Type II and Type III applications.
19.424.010 Procedure.
Site design review shall be conducted as a Type III procedure, as specified in FMC 19.424.020, using the procedures in Chapter 19.410 FMC, and using the approval criteria contained in Chapter 19.426 FMC. (Ord. 6-2001 § 1)
19.424.020 Determination of Type II and Type III applications.
Applications for site design review shall be subject to Type II or Type III review, based on the following criteria:
A. Residential multi-unit dwellings (five or more units) units shall be reviewed as a Type III application.
B. Commercial, industrial, public/semi-public, and institutional buildings with 5,000 square feet of gross floor area or smaller shall be reviewed as a Type II application, except when development review is allowed under Chapter 19.423 FMC. Commercial, industrial, public/semi-public, and institutional buildings with greater than 5,000 square feet of gross floor area shall be reviewed as a Type III application.
C. Nonresidential developments with more than one building (e.g., industrial building with accessory workshop) shall be reviewed as Type III applications, notwithstanding the provisions contained in subsections A and B of this section.
D. Nonresidential developments with 25 or fewer off-street vehicle parking spaces shall be reviewed as Type II applications, and those with more than 25 off-street vehicle parking spaces shall be reviewed as Type III applications, notwithstanding the provisions contained in subsections A through C and E and F of this section.
E. Developments involving the clearing and/or grading of 10 acres or a larger area shall be reviewed as Type III applications, notwithstanding the provisions contained in subsections A through D and F of this section.
F. All developments in designated sensitive lands and historic overlay districts shall be reviewed as Type III applications. (Ord. 1-2024 § 1 (Att. A); Ord. 6-2001 § 1)