Chapter 17.46
AIRPORT FACILITIES DISTRICT (AF)
Sections:
17.46.030 Development standards.
17.46.040 Other applicable standards.
17.46.010 Purpose and intent.
The airport facilities district is intended to ensure the continued safe operation of the Colville Airport and reduce conflicts by providing for airport-related facilities. (Ord. 1184 NS § 4, 1999; Ord. 1160 NS § 1, 1997).
17.46.020 Permitted uses.
Uses permitted in the AF district shall be those directly related to the maintenance and operation of the Colville Airport. Examples of uses permitted in this district are shown in Table 17.12.070. (Ord. 1184 NS § 4, 1999; Ord. 1160 NS § 1, 1997).
17.46.030 Development standards.
All development in the AF district shall comply with the following standards:
A. Minimum lot size: no limitation.
B. Minimum lot width: no limitation.
C. Yard requirements:
1. Front yard: zero feet.
2. Rear yard: zero feet, except 20 feet if adjacent to an existing residential use.
3. Side yard: zero feet, except 20 feet if adjacent to an existing residential use.
D. Maximum lot coverage: 100 percent.
E. Building height: 35 feet, or as necessary to comply with the airport landing overlay district requirements. (Ord. 1324 NS § 5, 2004; Ord. 1184 NS § 4, 1999; Ord. 1160 NS § 1, 1997).
17.46.040 Other applicable standards.
In addition to complying with the provisions of this district, uses and activities shall comply with the provisions contained in Article III, Supplementary Standards, and Chapter 17.60 CMC, Airport Landing Overlay District (AL). In the event of any conflict between any provisions of the overlay zone and the primary zoning district, the more restrictive provisions shall apply. (Ord. 1184 NS § 4, 1999; Ord. 1160 NS § 1, 1997).