Chapter 27.10
MEASUREMENTS

Sections:

27.10.010    General provisions.

27.10.020    Tables.

27.10.010 General provisions.

Measurement of signs regulated by this code shall be in accordance with the definitions set forth in Chapter 27.06 RMC (Definitions) and with Tables 27.10.020(A), (B), and (C). [Ord. 3-89; Ord. 08-19 § 5].

27.10.020 Tables.

The following tables are hereby incorporated in this code:

A. Table 27.10.020(A) – General Provisions;

B. Table 27.10.020(B) – Specific Provisions; and

C. Table 27.10.020(C) – Maximum Number of Signs.

 

MEASUREMENTS

TABLE 27.10.020(A) – GENERAL PROVISIONS

ZONING DISTRICT

TYPE OF SIGN

MAXIMUM NO. OF SIGNS ALLOWED

MAXIMUM HEIGHT OF SIGN

MAXIMUM SIZE OF SIGN

FORMULA FOR COMPUTING MAX. SIGN AREA (SIZE)

MINIMUM SETBACKS

B-C, C-2, C-3, CBD, CR, I-1, I-M, M-2

Bldg. Mounted

Varies – See Table 27.10.020(C)

Height of bldg.

300 sq. ft.

20% of largest facade

 

Freestanding

1 per street frontage (b)

30 ft.

240 sq. ft.

12 x square root of F
(F = longest building wall)

Center 2/3 of frontage or 15 feet from side property lines

C-1, C-LB, CW and WF

Bldg. Mounted

1 per street frontage or user

Height of bldg.

100 sq. ft.

10% of building facade.

 

Freestanding

1 per street frontage (b)

20 ft.

40 sq. ft.

1 sq. ft. per foot of building frontage

Center 2/3 of frontage or 15 feet from side property lines

R-3

Bldg. Mounted

1 per street frontage

15 ft.

32 sq. ft.

2 sq. ft. per dwelling

 

Freestanding

1 per street frontage (b)

8 ft.

32 sq. ft.

2 sq. ft. per dwelling

Building setback

R-2, R-1M, R-1L, R-1, SAG, AG, FP, PR and PUD

Res. ID Sign

 

 

2 sq. ft.

 

 

Signs for Nonresidential Uses (Bldg. Mounted)

1

25 ft.

50 sq. ft.

 

 

Bldg. Mounted Signs (Wall Signs)

1

16 ft.

32 sq. ft.

 

Building setback or 0 if 150 ft. away from any residence

Signs Located Near Entrance to Subdivision or Neighborhood

1 per entrance, maximum of 4 per subdivision/neighborhood

4 ft.

32 sq. ft.

 

Between building line and property or within right-of-way if okayed by city engineer

(a)    In multiple-business centers, the facade area for each tenant or user is derived by measuring only the surface of the exterior of the premises actually used by the tenant or user.

(b)    Where more than one sign is permitted, there shall be a minimum distance of 100 feet between signs.

 

MEASUREMENTS

TABLE 27.10.020(B) – SPECIFIC PROVISIONS

TYPE OF SIGN

MAXIMUM SIZE/AREA

FORMULA

MAXIMUM HEIGHT

MAXIMUM PROJECTION ALLOWED

MINIMUM SETBACK

MINIMUM CLEARANCE

OTHER

Wall Signs

Varies per zone

Varies per zone

Top of bldg. wall

18 inches

N/A

8' if sign projects more than 6 inches

May project over public property

Projecting Signs

Varies per zone

Varies per zone

1' above bldg. wall

– 8' from bldg. face

– 30" over public sidewalks

N/A

10'

 

Marquee and Canopy Signs

Varies per zone

Varies per zone

1' above face attached to

1' from face attached to

N/A

10'

 

Signs under Marquees and Canopies

6 sq. ft.

N/A

N/A

N/A

N/A

8'

Maximum of 2' below canopy or marquee

Signs Authorized by RMC 27.08.030(H)

12 sq. ft.

N/A

N/A

N/A

Behind Property Line

N/A

1 per street frontage

Window Signs

15 sq. ft. or 10% of window area, whichever is less

N/A

N/A

N/A

N/A

N/A

 

Freeway Interchange Signs

240 sq. ft.

12 x square root of F (F = longest building wall)

80'

N/A

Behind Property Line

N/A

 

 

MEASUREMENTS

TABLE 27.10.020(C) – MAXIMUM NUMBER OF SIGNS

(C-2, C-3, CBD, CR, CW, I-1, I-M, and M-2 ZONES)

SURFACE AREA OF LARGEST BUILDING FACADE

MAXIMUM NUMBER OF SIGNS

Less than 500 square feet

3

500 square feet – 1,499 square feet

4

1,500 square feet – 2,999 square feet

5

Over 3,000 square feet

6

ADDITIONAL PROVISIONS:

– Building located at intersection – add one sign.

– Buildings with more than 3,000 sq. ft. on one facade are permitted one sign for each clearly differentiated business use with a separate exterior entrance, in addition to the six allotted above.

– Where the maximum number of signs allowed above is not sufficient to allow at least one sign for each tenant or user of a building, the maximum number shall be increased to ensure that all tenants or users are allowed on building-mounted signs.

[Ord. 3-89; Ord. 04-09; Ord. 08-19 § 5].